# L-Pad (1st Series) Attenuator

## Overview

L-pad attenuators are essentially broadband L-section matching networks. They are used mainly for impedance transformation (e.g. in network analyzers 50 Ohm to 75 Ohm).

### Topology

```
Input ──[R1]──┬── Output
              │    Zout ≠ Zin
             [R2]
              │
             GND
```

Series resistor R1 followed by shunt resistor R2.

### Design Equations

```
α = 10^(-Attenuation/10)    (power ratio, α < 1)

R₁ = -Zin × (α - 1) / (√α + 1)    (series)

R₂ = -Zin × (α + √α) / (α - 1)    (shunt)

Zout = R₂ × (R₁ + Zin) / (R₁ + R₂ + Zin)
```

### Power Dissipation

```
Pdiss_R1 = Pin × (1 - √α)

Pdiss_R2 = Pin × α × (1 - α) / (α + √α)
```

### Example: 10 dB, Zin = 50 Ω, Pin = 1 W

```
α = 10^(-10/10) = 0.1
√α ≈ 0.316

R₁ = -50 × (0.1 - 1) / (0.316 + 1)
   = -50 × (-0.9) / 1.316
   ≈ 34.2 Ω

R₂ = -50 × (0.1 + 0.316) / (0.1 - 1)
   = -50 × 0.416 / (-0.9)
   ≈ 23.1 Ω

Zout = 23.1 × (34.2 + 50) / (34.2 + 23.1 + 50)
     ≈ 20.0 Ω
```

**Power dissipation:**
```
Pdiss_R1 = 1 × (1 - 0.316) ≈ 0.684 W
Pdiss_R2 = 1 × 0.1 × (1 - 0.1) / (0.1 + 0.316) ≈ 0.216 W

Pout = 1 - 0.684 - 0.216 = 0.1 W  ✓ (10 dB attenuation)
```

## Comparison: First Series vs. First Shunt

### 10 dB Example (Zin = 50 Ω)

| Parameter | First Series | First Shunt |
|-----------|--------------|-------------|
| **R₁ value** | 34.2 Ω | 73.1 Ω |
| **R₂ value** | 23.1 Ω | 108.2 Ω |
| **Zout** | 20.0 Ω | 138.0 Ω |
| **Power in R1** | 68.4% | 21.6% |
| **Power in R2** | 21.6% | 68.4% |

**Key observations:**
- **First series:** Zout < Zin (impedance step-down)
- **First shunt:** Zout > Zin (impedance step-up)
- Power distribution is **reversed** between topologies

### Output Impedance vs Topology

| Attenuation (dB) | First Series Zout | First Shunt Zout |
|------------------|-------------------|------------------|
| 3 | 35.4 Ω | 70.7 Ω |
| 6 | 25.0 Ω | 100.0 Ω |
| 10 | 20.0 Ω | 138.0 Ω |
| 20 | 16.7 Ω | 500.0 Ω |

- **First series:** Zout decreases with attenuation
- **First shunt:** Zout increases with attenuation

## See Also

```{toctree}
:maxdepth: 1
/RFCircuitSynthesis/index
/RFCircuitSynthesis/Attenuators/index
```